ADHESIVE KIT | Black

17 €
17 €
0 €
● In stock
Parameters
Product color: Black

Parameters
Product color: Black

Parameters
Product color: Black

View Full Details
  • Adhesive kit for simple repairs. Contents: 15 g tube of adhesive, spare patches, modified push-push valve reducer. The spare patches are produced in the following colour combinations: forest green/grey (13/11C), spring green/grey (1C/11C), red/grey (5C/11C), yellow/grey (2A/11C) and black/grey (3C/11C). The adhesive kit is also included in the package with all Gumotex boats.
    • 6 pcs of patches: 2× round patches, diameter 6 cm; 2× round patches, diameter 10 cm; 2× rectangular patches, 8 × 24 cm,
      • Repair procedure: Mark the damaged area on the boat/lounger and select or trim a patch according to its size. The surface of the patch and the area to be repaired must be dry, clean, and free of any old adhesive residues. For a perfect bond, we recommend degreasing both surfaces with acetone. Apply a thin layer of Elastick adhesive to both bonding surfaces; after it dries, apply a second layer of adhesive. Once the second layer becomes tacky, place the patch over the damaged area, press firmly, and weigh it down or roll it with a roller on a flat surface. For minor repairs (punctures), the boat can be inflated and used again after 30 minutes. For mattresses and larger repairs, we recommend waiting 24 hours. More complex repairs should be carried out directly by the manufacturer or at an authorized repair service.

Similar products

Last viewed